Inverted roof
An inverted roof, also referred to as a ‘protected membrane’ or ‘upside down’ roof, is form of flat roof in which the waterproofing layer is beneath the thermal insulation rather than above it.
The waterproofing layer is typically a liquid-applied membrane above a concrete roof slab, with insulation boards laid over the top, weighted down with either paving slabs or gravel ballast to protect against wind uplift and flotation. Rainwater percolates down through and between the insulation boards to the membrane where it is drained away through rainwater outlets.
One of the main benefits of the inverted roof method is that the membrane is protected by the insulation from the expansion and contraction caused by weather fluctuations, such as frost and solar radiation. It is also protected from damage by traffic on the roof, such as people walking, the movement of equipment and so on.
When calculating the U-value of the roof, consideration must be given to the fact that the insulation is likely to be wet a lot of the time, with some moisture trapped beneath the boards. This can create the risk of condensation occurring within the build-up of the roof, as the temperature of the membrane can be below the dew point. However, once the roof deck (and the membrane) warms up, the condensation will be able to evaporate. Problems can occur if the accumulation of condensation persists.
For more information, see Specifying insulation for inverted roofs.
For a case study of an inverted roof defect, see Inverted roof defect - case study.
[edit] Related articles on Designing Buildings
Featured articles and news
International Electrician Day, 10 June 2025
Celebrating the role of electrical engineers from André-Marie Amperè, today and for the future.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.
Skills England publishes Sector skills needs assessments
Priority areas relating to the built environment highlighted and described in brief.
BSRIA HVAC Market Watch - May 2025 Edition
Heat Pump Market Outlook: Policy, Performance & Refrigerant Trends for 2025–2028.
Committing to EDI in construction with CIOB
Built Environment professional bodies deepen commitment to EDI with two new signatories: CIAT and CICES.
Government Grenfell progress report at a glance
Line by line recomendation overview, with links to more details.
An engaging and lively review of his professional life.
Sustainable heating for listed buildings
A problem that needs to be approached intelligently.
50th Golden anniversary ECA Edmundson apprentice award
Deadline for entries has been extended to Friday 27 June, so don't miss out!
CIAT at the London Festival of Architecture
Designing for Everyone: Breaking Barriers in Inclusive Architecture.
Mixed reactions to apprenticeship and skills reform 2025
A 'welcome shift' for some and a 'backwards step' for others.
Licensing construction in the UK
As the latest report and proposal to licence builders reaches Parliament.
Building Safety Alliance golden thread guidance
Extensive excel checklist of information with guidance document freely accessible.
Fair Payment Code and other payment initiatives
For fair and late payments, need to work together to add value.
Pre-planning delivery programmes and delay penalties
Proposed for housebuilders in government reform: Speeding Up Build Out.
High street health: converting a building for healthcare uses
The benefits of health centres acting as new anchor sites in the high street.